Tag: FT-1500M

Hamshack Hula

I have been steadily working at getting the hamshack into some sense of functionality. Back in June, everything was looking good. I’d moved everything from the old house to the new house and adjusted for the more “constrained” space that my shack now occupies. I was just about there… and then my household goods from Korea arrived. Lacking time to adequately put everything in its place, boxes ended up getting dumped in the hamshack.

The basement gameroom has been my primary focus for the last two months. We got the new couch, the arcade cabinet is working, the pinball machine needs a bit of work, and the cocktail arcade cabinet is doing great. Now that the gameroom is just about where I want it, I’ve turned my attention back to the hamshack.

Before I moved my workbench to the new house, I should have taken a photo of how I had the pegboard setup. Being gone for year and not using the bench, I had no idea of what I had hanging where. Today I was able to get the workbench in order after spending a few hours sorting through the boxes that had come from Korea.

I’ve also started parting with equipment I don’t need or will probably not doing anything with. The Kenwood TS-930S is now sold. Hopefully the Heathkit SB-220 will soon be sold. Also the Radio Shack HTX-242 that was in the XYL’s car until I upgraded her to a TM-D710A is sold. It is time to get rid of the FT-1500Ms as well. Being a proud ownder of the Yaesu VX-8GR, I can now part with my trusty Kenwood TH-D7A(G). I am continuing to rumage through the shack pulling out what I really don’t need. So far, Craigslist has been working well. I’ll use eBay as a last resort.

So with my efforts, I can actually reach my operating desk, turn on the computer, sit down.

…. now I need to get an antenna up, something more permanent than a Buddipole.

TM-D710A and UI-View32


I was able to interface my TM-D710A with UI-View32. Previously I was using UI-View32 along with a Kantronics KPC-3+ and a dedicated FM rig (FT-1500) with a direct packet connection. This set up worked well – UI-View32 puts the KPC-3+ into KISS mode and the rest of the settings are pretty straight forward. The advantage of using the TM-D710A (one of many) is that with its two radios in one I can run my APRS station and also get on the local repeaters while only using my one VHF/UHF antenna.

I use Weather Display in conjunction with my Davis Vantage Pro2. Weather Display is an amazingly powerful application and it works well with UI-View32, allowing my APRS station to transmit my weather data in addition to my position info.
Configuring TM-D710A and UI-View32 to work together is little more tricky.
The TM-D710A has a built-in TNC. When you use the TM-D710A in a mobile configuration, the TNC runs in APRS mode. When used with UI-View32, the TNC operates in standard packet mode. It looks like it is possible to use the TNC in KISS mode, but I am not sure how to do that with UI-View32. The directions from Kenwood for the TM-D710A include a recommended CMD file to be used with UI-View32. I used the recommended CMD file and UI-View32 and the TM-D710A worked together up to a point. What was missing were two TNC commands that allow UI-View32 to see the received APRS traffic and then display the traffic on the UI-View32 map. Here is what the CMD file looks like now:

;This is a sample TNC initialization file for use with
;the Kenwood TM-D710A.

[SETUP]
;DON’T alter anything in this section unless you are
;sure you know what you are doing!
COMMAND_PROMPT=cmd:
COMMAND_CHARACTER_CODE=3
ESCAPE_CHARACTER_CODE=
CONV_COMMAND=CONV
MYCALL_COMMAND=”MYCALL ”
UNPROTO_COMMAND=”UNPROTO ”
NO_BEACON_COMMAND=BEACON EVERY 0

[INIT_COMMANDS]
^C^C^C
;Control mode on.
TC 1!TS 1
;Select TNC PKT mode on A band.
TN 2,0!TN 2,0
;Waiting for command prompt.
^M!cmd:!5
;Repeating the first two commands is not an error!
ECHO OFF
BEACON EVERY 0
ECHO OFF
BEACON EVERY 0
;Also UI-View32 to see incoming APRS traffic
MON ON
MCOM ON

Station goals


I set a few goals back in July and thought I would take a look at my progress:

What I want to accomplish in the Kansas Shack:
– HF phone and CW operation; 80m-10m
– HF digital modes (PSK-31, RTTY, PACTOR III)
– Computer logging
– 2m FM base station
– APRS weather station, interfaced with a dedicated 2m transceiver
– Online weather page, showing current weather conditions
– Separate, organized workbench

HF phone and CW operation; 80m-10m – my HF activities are centered around my IC-7000. I would like to get the TS-930S up an operational, but I am afraid that is not in the budget at this point.

HF digital modes (PSK-31, RTTY, PACTOR III) – I am using my RIGblaster Plug & Play for digital modes… other than PACTOR III. I have not yet hooked up my SCS PTC-IIusb Modem.

Computer logging – I do have Ham Radio Deluxe loaded now, but I want to find a good linux version.

2m FM base station – currently the FT-2800M for the job. I do have some plans to move my IC-208H from the truck into the shack. That will give me a 70cm capability in addition to the 2M. The truck is getting a new rig… more on that soon.

APRS weather station, interfaced with a dedicated 2m transceiver – I am using a FT-1500 for the job, connected to UI-View32 and receiving data from the Davis VantagePro2. The problem here is that I only have the one antenna up so this limits my ability to hop on the local repeaters from the shack. I need to either get a coax switch to be able to switch between the two rigs or put another antenna up.

Online weather page, showing current weather conditions – yes indeed… I think this is working pretty nice.

Separate, organized workbench – also a success… although it seems to be too crowded with stuff. The best part is the pegboard for tools – I no longer have the problem of quickly locating the tools I need.

Overall, I am happy with the progress I have made getting the shack in shape. What I want to work on now:
– New antenna for HF
– Fix up the ARSIB
– Get the SB-200 amp working
– Transition all shack computers to Ubuntu linux

Radio Room Reconfiguration

Spent some time today reworking the shack…. still have a bit more to do.

(1) I was using two different power supplies – a PS-125 (25 amps) for the IC-706MKIIG and a different power supply for the FT-2800M (2M FM), and FT-1500M/KPC3+ (2M FM packet). I am now using the Alinco DM-330MVT (32 amps) to power the IC-706MKIIG and the FT-2800M. I’m now using the RigRunner 4010S for power distribution. I still need to make a power cable for the RigBlaster so I can get rid of the wallwart.

(2) I moved the FT-1500/KPC3+ and the other power supply out to the garage. My intent is to hook it up to the garage computer. I’ll be able to access the packet functions over the network.

(3) The weather station is down! I plan on getting that working off the garage computer as well.

(4) Heathkit SB-220 – now in the shack. But I’m still a long way from getting it operational. I need to make a list of everything I need to do to get it operational. Part of that will include putting my heavy duty MFJ tuner into action.