Amateur Radio – a hobby where people talk about their hobby using their hobby.
From the Jupiter Tequesta Repeater Group is a great guide for putting up a Buddipole as a vertical dipole
Mark has some very useful tips:
– Use 1-gallon plastic jugs filled with water to keep the tripod stable
– Put a coil balun comprised of 13-turns of coax, approximately 9” in diameter right below the VersaTee
– Use the “down” leg of the vertical for tuning the antenna
Thanks Mark!
Progress has been slow in getting my shack setup at the new QTH in Lansing, KS. I had success running three differnt feedlines from the shack, through a narrow path between the basement ceiling and the main floor to an access box on the houses exterior wall exiting to the side yard. I purchased 50′ coax cables for each run, thinking that 50′ feet might have been too long. However, 50′ ended up being right on the nose, offering me just the right amount of slack in the hamshack and easily reaching the access panel on the exterior wall.
I have unpacked the majority of my equipment that came from Korea and from the old house in Leavenworth. The weather station and VHF/UHF antenna is temporarily mounted on our deck. The plan is to mount it on the chimney, but I am going to need some help getting it up there.
I have a Buddipole up in the side yard and connected it up to one of the feedlines. I fired up the K3 and the radio seems to be working well. Next I tried connecting the Microham USB III digital interface, but have run into some trouble in getting it to cooperate with fldigi. This time, once I get everything working, I am going to copy down all the settings as well as the connections to make sure next time I move it, I don’t have such a steep curve to re-figure out what I had already figured out some time ago.
Some minor problems I am encountering (besides the fldigi/Microham USB III): the weather station gets buggy when I am transmitting on VHF and the weather station software freezes up when I transmit on 40M. The later problem is nothing new and I had limited success trouble shooting the problem by adding chokes to the weather station data display power supply and putting the computer that runs the weather station software on an UPS. The VHF transmission problem is new. I have a 2″ PVC pipe that both the VHF antenna and the weather station are mounted on. I have not previously had a problem with any interference from the VHF antenna, but I will try and move the weather station down the PVC pipe a bit and see if that eliminates the interference issue.
Tasks that still await me: cleaning up the workbench, clearing out the excess boxes that are lying around, organize the QSL cards. I need to establish (and stick with) a system for managing QSL cards. I am pretty sure I have enough cards to get my DXCC, but I have to put the cards in order. I also have a stack of cards to send to the outgoing bureau for the YI9MI operation and a handfull for HL2/AD7MI and HL9MI.