KH6 – Hawaii Bound

My current assignment at Fort Leavenworth has me traveling quite a bit. My intent has been to bring a rig with me and have some casual QSOs while on the road. My success has been mixed. I would mostly attribute this to either a lack of planning on my part or being in a stuck in a hotel room with zero antenna opportunities.

One of the most inspiring ham radio blogs I ever ran across was the 100 Pound Dxpedition. I enjoyed how Scott, NE1RD, covered his adventures of conducting portable operations… documenting what worked and what did not. His last post on that paticular blog was back in 2007, but I still use the site as a reference. Scott’s praise for the Buddipole led me in using the Buddipole during my recent tour in Korea. Another tip from Scott I am going to try out is using a hardside golf bag case to transport my Buddipole to Hawaii.

Now for a rig… I think the Elecraft KX3 would be ideal for a Hawaii trip. With 10 watts output and an internal battery, I can’t think of better rig to take to the beach. But the wait time for the KX3 is still quite a while. I have both an Elecraft KX1 and a Yaesu FT-817ND. The KX1 would be great due to its small size and ease of use. But it is limited to only CW and I would like to do some PSK in addition to CW.

I pulled out my FT-817 and conducted an inventory:

    – West Mountain Radio RIGblaster Plug n Play connects directly to the DIN socket on the back of the rig.
    – CAT cable that connects from the RIGblaster to the rig’s ACC socket which enables rig control.
    – PowerPole 12v adapter.
    Palm Paddle.
    Elecraft T1 Auto-tuner.
    – Nifty manual for the FT-817.



My FT-817 has quite a few of the optional bells and whistles from W4RT:

I also splurged on two recent upgrades:

    Peg Leg tilt stand – I think this will be helpful as one of my significant dislikes of the FT-817 is the small display which is hard to see.
    – Magnets for the Palm Paddle – this is critically important as the Palm Paddle by itself is not heavy enough. The magnets allow the Palm Paddles to firmly stick to the top of the FT-817.

For PSK, rig control, and logging I have my Dell Mini netbook. I had not used the netbook in a while, so I started it up to see how it was working. I initally purchased it back in 2009 baselined with Ubuntu and have kept Ubuntu installed on it since then. After booting it up. I updated the distribution to 10.04 LTS and installed fldigi. The RIGblaster easily interfaced with the netbook via a USB connection and the headphone/microphone jacks.

I configured fldigi to work with the RIGblaster to include rig control using Hamlib:

    – Audio: PortAudio using the netbook’s hardware soundcard for both Capture and Playback
    – Rig: Hamlib; Device /dev/ttyUSB0; Baud rate 38400; Stopbits 2; PTT via Hamlib command checked

… clicked on the Initialize button and I was good to go.

Setting up the macros on flidigi is pretty straightforward with the default macros only needing slight tweaking for my personal preferemces.

Once I fired everything up all I had to do was switch to 14.070 MHz, switch the mode to DIG, and drop the input level a bit. With the narrow yellow PSK streams cascading down the waterfall, I picked one that was calling CQ and answered. Transmit worked and my home antenna provided a nice low SWR, no need for the tuner. My macros worked and the QSO was concluded successfully. All with 5 watts.

I plugged in the Palm Paddle, switched to 7.115 MHz, listened and heard nothing, then used the paddles to send QRL? a few times. SWR still looked decent. After a few CQ calls, I got an answer followed by a short QSO. Great – both PSK and CW were working FB.

Now the question is: do I want to bring my small Tokyo Hy-Power HL-100B amplifier that will raise the output to 100 watts? If I bring the amp, I will have to bring a power supply and a different tuner. I am thinking I need to be able to use two different configurations:

    (A) Beach and Buddipole: using the barefoot FT-817, running everything on batteries.
    (B) Lanai Portable: used from the hotel room, with amp and assoicated power supply.

Now it is time to go through my Buddipole bags and figure out what I need to pack.

Looks like I will be there during the Hawaii QSO Party!

2 thoughts on “KH6 – Hawaii Bound”

  1. Good morning a trip to Hawaii sounds just great and to have ham radio along for the ride….even better. The FT-817 sounds like the perfect rig for the trip. The KX3 still have a waiting time of about 60 or more days. The Palm paddle is great I use that with my K2 when portable. I have heard lots about the buddy pole but have not up to this point seen one in action. Keep us posted with your Hawaii adventure.

  2. I have my FT-817 set up in the shack now to re-familiarize myself with it. If I was to keep only one extra option for the FT-817, it would be the Peg Leg tilt stand. It makes a huge difference in seeing the FT-817 display.

    The Palm Paddle is a joy to use. But I have been having problems with the Code Cube (the keyer that attaches to the Palm Paddle). I have been unable to get it to work with the FT-817. I need to do some additional troubleshooting.

    I still need to layout my Buddipole and pack it up for the trip.

    Departure is Wednesday!

Comments are closed.