{"id":1211,"date":"2006-05-18T12:44:00","date_gmt":"2006-05-18T12:44:00","guid":{"rendered":"http:\/\/www.ni0l.com\/?p=1211"},"modified":"2006-05-18T12:44:00","modified_gmt":"2006-05-18T12:44:00","slug":"a-simple-iambic-paddle-for-travelers","status":"publish","type":"post","link":"https:\/\/www.n0zb.com\/index.php\/2006\/05\/18\/a-simple-iambic-paddle-for-travelers\/","title":{"rendered":"A Simple &#8216;Iambic Paddle&#8217; for Travelers"},"content":{"rendered":"<p><img decoding=\"async\" src=\"http:\/\/www.ni0l.com\/pictures\/cw.gif\"><br \/>\nFrom :  Charles &#038; Sandra Cohen <\/p>\n<p>Scott &#8212;<\/p>\n<p>Sorry, no parts list.  And the bottom is covered by silicone rubber, so a photo won&#8217;t help you.<\/p>\n<p>Radio Shack should have everything except maybe the two switches.  Those, you could get at any electronic parts distributor as &#8220;tactile switches&#8221;.  They come in various sizes.  Mine are 12mm square, with a 160 gm activation force.  (less activation force would be better, but I wouldn&#8217;t want anything smaller).<\/p>\n<p>The top of my phone jack was transparent, and I could figure out which pin (on the bottom) corresponded to which phone plug contact.  You might have to enlarge one or two holes in the board, and I bent or broke one unused pin.  But the rest of the pins go through the holes to the back of the board, and hold the phone jack in place.<\/p>\n<p>Each switch has four pins (two for each side of the switch contacts).  I just pushed them through the holes in the board without any sockets.  The pins fit tightly enough so there&#8217;s no play after the pins are soldered (as described next).<\/p>\n<p>On the back of the board, there are four wires soldered in place:<\/p>\n<p>One from the &#8220;dit&#8221; switch to the &#8220;tip&#8221; contact of the phone jack;<\/p>\n<p>One from the &#8220;dah&#8221; switch to the &#8220;middle ring&#8221; contact of the phone jack;<\/p>\n<p>One from the &#8220;ground&#8221; (outer barrel) contact of the phone jack to the _other side_ of the &#8220;dit&#8221; switch;<\/p>\n<p>Another from the &#8220;ground&#8221; contact of the phone jack to the _other side_ of the &#8220;dah&#8221; switch.<\/p>\n<p>The ceramic fridge magnets (Krazy-glued to the back) are thick enough so that the pins of the switches and phone jack don&#8217;t touch the FT-817.  I covered the soldered joints with silicone sealant &#8212; no possibility for accidental shorts, that way.<\/p>\n<p>That&#8217;s it. This was one of the few times that something I built worked right on the first try.  This is _not_ a fancy project.  <\/p>\n<p>Good luck ! <\/p>\n<p>   Charles<\/p>\n","protected":false},"excerpt":{"rendered":"<p>From : Charles &#038; Sandra Cohen Scott &#8212; Sorry, no parts list. And the bottom is covered by silicone rubber, so a photo won&#8217;t help you. Radio Shack should have everything except maybe the two switches. Those, you could get at any electronic parts distributor as &#8220;tactile switches&#8221;. They come in various sizes. Mine are &hellip; <a href=\"https:\/\/www.n0zb.com\/index.php\/2006\/05\/18\/a-simple-iambic-paddle-for-travelers\/\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;A Simple &#8216;Iambic Paddle&#8217; for Travelers&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_feature_clip_id":0,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":false,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[11],"tags":[69,100,140],"class_list":["post-1211","post","type-post","status-publish","format-standard","hentry","category-radio","tag-cw","tag-ft-817","tag-kits-homebrew"],"jetpack_publicize_connections":[],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p9vUOZ-jx","jetpack_featured_media_url":"","_links":{"self":[{"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/posts\/1211","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/comments?post=1211"}],"version-history":[{"count":0,"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/posts\/1211\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/media?parent=1211"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/categories?post=1211"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.n0zb.com\/index.php\/wp-json\/wp\/v2\/tags?post=1211"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}